It is used for testing the wear resistance of various textiles, and also for testing the wear resistance of leather, carpet, rubber, plastic sheet and other materials.

ISO5470-1  ASTM D3884、 DIN53863.2

1. Diameter of worktable: 115mm

2. Working disk speed: 50-120 r/min. It can be adjusted arbitrarily and reversed.

3. Shape size of grinding wheel: diameter 50mm and thickness 13mm

4. Numbering method: electronic counting 0-999999 times arbitrarily set, add or subtract two counting modes

5. Pressure mode: depending on pressure sleeve weight 250cN or adding weight combination

6. Weight:

Weight (1): 750cN (by unit deadweight)

Weight (2): 250cN

Weight (3): 125 cN

7. Maximum thickness of specimen: 20mm

8. Vacuum cleaner: A1-8237F air volume adjustable

9. Maximum power consumption: 1400W

10. Power Supply: Voltage 220V Frequency 50Hz

11. Instrument outline size: 380 * 370 * 360 (L * W * H) mm

(excluding vacuum cleaners)

12. Net weight: 30Kg (excluding vacuum cleaner)

[Test mode]

Under the condition of controlling pressure and wear motion, the samples were worn by rotating friction. Test samples placed on the platform, right

The sliding rotation of the two friction wheels rotates on the vertical axis. The wear resistance is estimated according to the standard method.

[Instrumentation characteristics]

1. LCD blue screen display is adopted, and test parameters are set freely.

2. Using two counting modes of addition and subtraction, the six-bit electronic counting is set arbitrarily from 0 to 999999 times.

3. The rotational speed of the working disk can be adjusted, and it can be tested in both positive and negative directions, which is suitable for different standards.

4. Ergonomic design. The surface is sprayed once, which is light and beautiful.