It can be used to measure the compressive strength of plastic drainage belt cores, as well as the compressive properties of textiles, leather, laminates, rubber, strands, ropes and other materials.

Notes JTG E50 T1143, SL/T 235, JT/T521, etc. Satisfy the above criteria, but not limited to them

1. Maximum test force: 5kN

2. Force accuracy: better than (+1%)

3. Pre-tension mode: manual

4. Sensor accuracy: +1% (2%-120% full range)

5. Working Mode: Vertical and Space

6. Test area: 30 cm 2 (_6.18 cm), 50 cm 2 (_7.98 cm), optional

7. Speed range: 1mm/min--500 mm/min

8. Compression Deformation Measurement Accuracy: Better than (+1%)

9. Compression Deformation Measurement Resolution: 0.01mm

10. Test machine size: 660 x 420 x 1150 mm

11. Host Weight:: 110kg

12. Power supply voltage:: 220V

1. Software on-line operation is used to display test parameters, test results and test curves in real time on the screen, which supports the Chinese or English operation interface.

2. Adopt high precision, full digital speed regulation system and precision reducer, T-screw, high positioning accuracy, pressure speed arbitrary digital setting;

3. A closed-loop, low-noise and stable driving system is composed of DC servo motor.

4. Using 32-bit A/D converter and high-precision sensor to ensure more accurate test;

5. Standard configuration can be used for constant-speed compression test.

6. It has many protective functions such as over-current, over-voltage and over-load.

7. It has the function of power-off protection to avoid data loss.

8. The unit of test results can be converted between kPa and kN.