This sample trolley is suitable for dyeing pure cotton, TC polyester cotton and other chemical fiber fabrics.

JF-400 Pneumatic Small Rolling Mill (Vertical)

JF-400B Pneumatic Small Rolling Mill (Horizontal)

1. Roll width: 420 mm, diameter 130 mm.

2. Roll hardness: 70 + 3 degrees (customized roll hardness can also be customized according to customer requirements).

3. Roll pressure: 0.1-0.5 Mpa

4. Speed: 0-10 m/min

5. Maximum rolling allowance: 65%

6. Driving power: 370W

7. Compressed air: 0.6 Mpa

8. Power supply: 220V 50HV 400W

9. Shape size: vertical 710 x 600 x 1340 mm (length, width and height)

Horizontal 710 x 740 x 1170 mm (length, width and height)

10. Weight: about 115Kg-120Kg

1. The rolling car adopts alkali-resistant cyanobutadiene rubber roll, which has corrosion resistance, good elasticity, moderate hardness, stable rolling fluid, no left-right deviation, good repeatability and good use.

Advantages of long time. It has a spray washing system.

2. The pressure of roll is controlled by compressed air and pressure regulator, which can better imitate the production process and make the sample process into the production process.

3. Roll lifting is driven by cylinder, with flexible movement and good consistency of pressure on both sides.

4. The machine is made of mirror stainless steel except for the skeleton shell, which is clean and beautiful in appearance and compact in structure.

5. Taiwan's "AIRTAC" high-performance electrical components, pneumatic parts;

6. Frequency converter speed regulation, which can be applied to a wider range of fabrics;

7. Equipped with kick safety protection device.

Institutional composition:

1, rack

2. Stainless steel forming shell.

3. High precision stainless steel NBR rollers with acid and alkali resistance are 1302.

4. Pressure Cylinder: 806.3 Mpa

5. Worm reducer: 0.37KW

6. Drive motor: YS7124 0.37kw 1400:rpm

7. Oil mist, water filtration and pressure regulation triple.

8. One solenoid reversing valve and one set of pressure-dividing and pressure-regulating system.

9. Frequency converter speed regulation.

Note: Customer-owned air compressor is required!