EN388.6.2 ISO20344.6.14

1. Load weight: 5N ± 0.05N

2. Blade size: Ø45±0.5 mm, thickness 3mm

3. Cutting stroke: 50mm

4. Cutting speed: 10cm/s

5. Counter 1~99999.9

6. Power supply AC220V±10% 50Hz

7. Instrument size 550 × 350 × 350mm (L × W × H)

8. Instrument weight 80kg

[Scope of application]:

The Glove Cut Resistance Tester is specifically designed to test the strength of protective gloves and upper protection zones. The cut resistance of the glove or upper is determined by cutting the specimen with a circular cutter rotating counterclockwise under a specified load.

[Instrument Features]:

1. The instrument has high precision and the test accuracy can reach 0.1 circle;

2. The main components are made of stainless steel, which is durable and durable;

3. The center of each slot of the sample holder is marked with a red line. The test can be aligned with the red line on the test bench to protect the cutter from damage.

4. Tungsten alloy steel blade with hardness of 740HV-800HV, easy blade replacement;

5. The instrument is equipped with two sets of clamps to facilitate standard test and sample test operation;

6. After the sample is cut, the cutter contacts the underlying conductive device and the signal line forms a loop, and the instrument stops automatically;

7. The large screen (LCD) displays the test results.