ASTM D3884, ASTM D1175, ASTM D1044, ASTM D4060, TAPPI T476, ISO 9352, ISO 5470-1, JIS K7204, JIS A1453, JIS K6902, JIS L1096, JIS K6964, DIN 52347, DIN 53109, DIN 53754, DIN 53799 .

[Scope of application]:

Products for test planes, such as: suitcases, carpets, cardboard, glass, plastic coatings, ceramic tiles, metal coatings, paints, varnishes, decorative sheets, high-pressure sheets, plastics, textiles, resilient floor mats, traffic paints, anodizing Wear test of layers, blankets, electronic components, decorative panels, waxes, labels, holsters, dental materials, automotive interiors, resins, furniture, etc., to assess the wear resistance of the products, such as measuring their mass loss, thickness loss And light transmittance.

[Test Mode]:

The material to be tested is placed on the turntable, and the two grinding wheels are pressed against the material with a certain weight to be worn. The grinding wheel rotates with the rotating surface of the sample disc to generate relative motion and wear, and the deviation of the grinding wheel shaft relative to the rotating shaft of the rotating shaft during the rotating process causes a sliding movement, thereby abrading the material. When the sample with an area of 10x10cm is subjected to wear, the surface material of the sample is worn by a full-angle particle or silk weave to form a complete ring.

[Instrument Features]:

1. It adopts LCD blue screen display and double disc design, which can be tested separately or simultaneously.

2. Exclusively adopt two counting modes of addition and subtraction, and the six-digit electronic counting is arbitrarily set from 0 to 999999 times.

3, exclusive use of the working wheel speed adjustable system, in addition to the conventional 60,72 rev / min, the speed is freely set and can be forward and reverse test, suitable for different standards and non-standard internal control test;

4, ergonomic design, the surface uses a spray molding, light and beautiful;

5. The suction arm of the vacuum pump is connected to the adjustable device on the back of the instrument through the knob, which can be precisely adjusted to suit different sample thicknesses.